Description
When the CD50/51 gets mounted on a vehicle gutter or similar position, these UHF Mopoles provide optimum performance with a largely omnidirectional pattern. Due to the low angle of radiation inherent in the dipole antenna pattern, a 4.0 dB improvement in performance is typical when compared to a 3 wave whip in the center of a metal roof. The end fed design of the UHF Mopoles incorporates a truly unique transformer in the base section. In this patented feed assembly, the dielectric of the coaxial feeder cable is trimmed to a set length and then introduced into the coil in termination. The result is a precisely matched feed that is so consistent that tuning to frequency from a chart becomes a matter of course. – CD51 antennas are fitted with a flexible nylon radome over a copper element – ideal in industrial applications. – CD50 antennas have an elegant and durable tapered stainless steel whip section. There are two styles of mounting arrangements offered. The CD50-xx-70 and CD51-xx-70 versions mount via a threaded stud and nut assembly. The antenna can be easily terminated, tuned and re-terminated in the field using the instructions supplied. Its patented design allows the coaxial cable to be replaced in the field without specialized tools or soldering. The CD50-xx-50 and CD51-xx-50 versions mate with the MBC coaxial base providing an internal, permanent connection in a completely sealed unit. The MBC base is easy to install and allows the entire antenna to be removed and replaced at will. • Versatile – Ground plane independence allows alternative mounting locations • Performance – High performance and largely omnidirectional pattern when not center roof-mounted • Convenient – Patented design allow termination or pretermination in seconds • Stainless steel whip or flexible nylon whips cater to individual needs • Durable – Base coil is virtually indestructible • Unique transformer design • Australian Patents #596830 and #656793 (1) Mopole antennas such as the CD50/CD51 exhibit a 4dB improvement in performance over a ¼ wave whip but in pattern tests deliver only 2.0 to 2.5dB of actual gain. This improvement in performance can be attributed to a lower angle of radiation and is of particular benefit to users in rugged terrain conditions and in heavily built up city areas. (2) Available pre-terminated with 5m RG58 cable. Use -73 or -53 suffix to replace -70 or -50 suffix.
Specifications:
| Whip Material | 17-7 PH Stainless steel |
| Whip Length mm | 395 |
| Cable And Connector | Not included, order separately. See note (2) |
| Tuning | Field tune to minimum VSWR using supplied tuning chart |
| Band | 450 – 520MHz |
| Frequency Range | 450 – 520 |
| Power w | 50 |
| Nominal Gain Dbi | 4 |
| VSWR | 13 MHz @ <1.5:1 VSWR |
| Tuned bandwidth | 13 MHz @ <1.5:1 VSWR |
| Frequency MHz | 450 – 520 |
| Mounting | Threaded Stud |
| Brand | RFI |





Reviews
There are no reviews yet.